Digital Imaging Accessory Shelf - Large STA-01-395
The STA-01-395 Large Digital Imaging Accessory Shelf can be used to hold and secure a 13-17 inch Notebook Computer for tethered shooting. It is supplied complete with an extension mouse shelf and integrated compartment for use with an external hard drive, power supply or external battery. The Large Digital Imaging Accessory Shelf provides a one-inch lip to prevent the Notebook from sliding forward during use. Two Metal, height-adjustable, Notebook Friendly Clamps securely hold the Notebook in place by clamping the Notebook on each side to the Shelf. A unique feature of the Large Digital Imaging Accessory Shelf, not found on other products, is the user adjustable tilt angle. The user can adjust the angle of the shelf for personal preference and reduced screen glare. The Large Digital Imaging Accessory Shelf is rigid and designed for daily commercial use. It is manufactured using sheet steel that is approximately 5/64ths [ 1.9mm] in thickness. The Detachable Pivot Arm allows the shelf to be repositioned, forward and back and is precision manufactured from solid aluminum with attention to detail using CNC machinery. Compatible for use with all Studio Titan America Stands. The Large Digital Imaging Accessory Shelf can also be mounted on top of a C-stand, light stand or 5/8th inch stud.
The Large Digital Imaging Accessory Shelf has been tested together with Mac-book Pro 13" & 15 & 16", IPAD PRO 12.7" and ASUS ROG 17". Machined slots provide an airway cooling path and clamping position options to access required ports. Includes an external compartment mounted underneath the Digital Imaging Accessory Shelf for hard drive, battery or power supply. It provides a rear cable exit and measures approximately 6" Deep x 4" Wide x 2" High. It was designed to accommodate portable hard drives, batteries and power supplies. It has been tested with WD Passport, G-drive and SAMSUNG T3/T5 SSD hard drives. The laptop shelf requires minimal assembly. Refer to the set-up manual below.
• Securely accommodates 13" to 17" Notebooks
• Approximate dimensions: W: 490mm (19 1/4") D: 300mm (11 3/4")
• Includes an external compartment mounted underneath the Digital Imaging Accessory Shelf for hard drive, battery or power supply with rear cable exit
• Includes mouse shelf
• Includes Notebook friendly clamps, mounting base and arm as shown in images
• Weight: 3kg / 6.6 lbs
Studio Titan reserves the right to make product changes and improvements as required. As a result the product supplied may not be exactly as pictured or specified.
Notebook shown is not included.
Materials composition:
-The Shelf and Arms are made of steel. The nuts and bolts are made of stainless steel. The handles are made of plastic. This product does not contain lead.
PACKAGING with Recyclable Materials: Studio Titan respects the environment. When selecting packaging materials, Studio Titan prefers using materials that are recyclable to reduce the environmental impact of its packaging. The column box blue outer plastic material is Polypropylene, abbreviated as PP, is a recyclable thermoplastic polymer widely used in many different products. PP is rugged. PP's resin identification code is 5, and it is recyclable. Product boxes and protection edges are made using corrugated cardboard which can be recycled at depots, in municipal curbside collection programs and through private recyclers. Internal securing foam blocks are made of PE (Polyethylene Foam) – Recyclable. Polyethylene foam products are 100% recyclable. Plastic bags are made of LDPE (Low-Density Polyethylene) – Recyclable plastic (check Local Authority) LDPE can be recycled. However, check with your Local Authority to ensure it is recycled in your area. This is described as a hard flexible plastic. LDPE’s identification code is 4 and it is recyclable. Yellow plastic strapping is made of PET (Polyethylen-terephthalat) – Recyclable. It is fully recyclable and commonly used in logistics.
Recycled Materials used inside the products: Studio Titan respects the environment. When manufacturing products, Studio Titan prefers using raw materials that are mixed with recycled materials to reduce the environmental impact of the products. For the Aluminum components: Vertical column, Horizontal column, Legs, Die cast carriages, base, cap and head-mount plates. The typical percentage of recycled aluminum metal to raw aluminum metal is 70% recycled to 30% raw. This globally adopted ratio provides good strength and finish. For the Steel components like: circular or square columns, hardware, casters, gears and counterweight. We have confirmed that the steel is made up of recycled materials combined with raw materials. We are not able to provide the actual percentage of recycled to raw on these components. Each product uses a different ratio based on its particular end use.