Studio Titan America
Rotating Commercial Precision Optical Imaging Support & Positioning System Upgrade Kit STA 01-350MK2 to STA 01-350RMK2 (Rotation)
Rotating Commercial Precision Optical Imaging Support & Positioning System Upgrade Kit STA 01-350MK2 to STA 01-350RMK2 (Rotation)
Couldn't load pickup availability
STA 01-350MK2 to STA 01-350RMK2 (Rotation) Upgrade Kit
Upgrade your existing Studio Titan America STA 01-350MK2 Precision Optical Imaging Support & Positioning System to the STA 01-350RMK2 configuration while reusing your original base, horizontal arm, and basket.
We developed this kit in response to customer requests for a straightforward upgrade. It includes a replacement vertical column with an internal counterweight, a vertical carriage, and the mounting brackets and hardware required to complete the conversion.
What’s included
- Replacement vertical column with internal counterweight
- Vertical carriage
- Mounting brackets and installation hardware
Parts you reuse from your 01-350MK2
- Base
- Horizontal arm
- Basket
Some assembly is required, please review the set-up & use manual.
Includes essential tools required to complete assembly.
STA 01-350R-MK2 Set-up & Use Manual
STA 01-350R-MK2__FRONT_SIDE_TOP DIMENSIONS
A unique Studio Titan feature not found on other Studio systems is the vertical and horizontal column graduated tape scales. The measuring scales provide a point of reference which allows the photographer to log and then quickly re-create a previous set-up.
Product Updates
Studio Titan reserves the right to make product changes and improvements as required. As a result, the product supplied may not be exactly as pictured or specified.
Specifications
Specifications
• Total Height : 240cm / 94.4 in / 7 feet 10.4 in
• Working Height Maximum : 220cm / 86.6 in (measured from Camera Plate to floor)
• Working Height Minimum : 50cm / 19.7 in (measured from Camera Plate to floor)
• Rotational Range of Horizontal Bar : 0-360 degrees
• Overall Width Horizontal Bar: 100cm / 39.3 in (measured end to end)
• Working Width Horizontal Bar- Fully Extended to one side of the vertical column : 83.5cm / 32.8 in (center of Camera plate to center of Vertical column)
• Width : 100cm / 39.3 in
• Weight : 62kg / 136lbs
• Suggested Wheels : 01-350-20-024
• Base Diameter : 100cm / 39.3 in
• Recommended General load capacity : 10kg (22lbs)
• Camera Plate Hardware: 3/8th inch - 16 thread
• Includes two Camera Head Mount Plates and Basket as shown
• Caster wheel diameter: 76mm / 3 in
Intended Use
Intended Use
1. Professional and commercial photographers.
2. Technicians and quality control personnel.
This product is intended for use in a studio, lab or manufacturing environment with a high ceiling, indoors on a floor that is smooth, hard, flat and unobstructed. It is designed to be used at all times with a load (Camera or laptop or both). Please refer to the products set-up and use manual for detailed information regarding intended use, set-up guidelines and instructions. When assembly is required, we recommend using an assistant during the initial product set-up.
Assembly Instructions are inside the package. If the assembly instructions are missing or you do not fully understand the instructions stop the assembly and consider the following resources. Visit the “SETUP” area of the website for documentation. Email questions to STA or contact Studio Titan America by phone for further assistance.
Options
Options
• Large accessory shelf STA-01-395 for notebook computer
• Small accessory shelf STA-01-397A for notebook computer
• STA-01-390 3-way head
• STA-01-398 Lowering Plate
Materials Composition
Materials Composition
The Vertical and Horizontal columns are made of aluminum.
Counter weight is S20C steel.
The nuts and bolts are made of steel.
The casters are polyurethane.
This product does not contain lead.
Note: Due to this products large size and specific packaging and handling requirements it is sold as "non returnable".
Packaging
Packaging
Packaging with Recyclable Materials: Studio Titan respects the environment. When selecting packaging materials, Studio Titan prefers using materials that are recyclable to reduce the environmental impact of its packaging. The column box blue outer plastic material is Polypropylene, abbreviated as PP, is a recyclable thermoplastic polymer widely used in many different products. PP is rugged. PP's resin identification code is 5, and it is recyclable. Product boxes and protection edges are made using corrugated cardboard which can be recycled at depots, in municipal curbside collection programs and through private recyclers. Internal securing foam blocks are made of PE (Polyethylene Foam) – Recyclable. Polyethylene foam products are 100% recyclable. Plastic bags are made of LDPE (Low-Density Polyethylene) – Recyclable plastic (check Local Authority) LDPE can be recycled. However, check with your Local Authority to ensure it is recycled in your area. This is described as a hard flexible plastic. LDPE’s identification code is 4 and it is recyclable. Yellow plastic strapping is made of PET (Polyethylen-terephthalat) – Recyclable. It is fully recyclable and commonly used in logistics.
Recycled Materials used inside the products: Studio Titan respects the environment. When manufacturing products, Studio Titan prefers using raw materials that are mixed with recycled materials to reduce the environmental impact of the products. For the Aluminum components: Vertical column, Horizontal column, Legs, Die cast carriages, base, cap and head-mount plates. The typical percentage of recycled aluminum metal to raw aluminum metal is 70% recycled to 30% raw. This globally adopted ratio provides good strength and finish. For the Steel components like: circular or square columns, hardware, casters, gears and counterweight. We have confirmed that the steel is made up of recycled materials combined with raw materials. We are not able to provide the actual percentage of recycled to raw on these components. Each product uses a different ratio based on its particular end use.
Share

Related Products
-
Digital Imaging Accessory Shelf - Small STA-01-397
Regular price $298.00 USDRegular priceSale price $298.00 USD -
Digital Imaging Accessory Shelf - Large STA-01-395
Regular price $487.00 USDRegular priceSale price $487.00 USD -
Horizontal Arm Bar with scale and end caps 1500mm Length STA-01-350HB-1500
Regular price $943.00 USDRegular priceSale price $943.00 USD -
Leg Weight Set STA-01-350LW-10
Regular price $721.00 USDRegular price$0.00 USDSale price $721.00 USD