Pre-order - Digital Studio Camera Stand STA-01-380
Pre-order: This product will be shipped when available
The STA 01-380 is designed for Digital SLR Photography. The STA 01-380 is a lighter duty version of the STA-01-360. Compared with the STA 01-360 the primary differences are: less load capacity, lower max height, smaller diameter vertical column, reduced overall width and fixed horizontal arm/bar. The STA 01-380 provides exceptional value and is a perfect fit for compact-sized studios. This stand is categorized as 1-axis, it provides vertical movement of the camera. Vertical [up/down] travel is provided by the vertical carriage. The Horizontal arm / bar is fixed. The STA 01-380 can also pass through a standard doorway which makes it easy to move between classrooms and labs. The two supplied Camera Head Mount Plates are user adjustable and provide the following shooting positions: 0 degrees, pointing up as supplied, 90 degrees, 180 pointing down for tabletop photography, and 270 degrees.
-User positioned vertical carriage with precision smooth motion ball bearings and secure axis lock with one user brake knob
-Precision-manufactured with attention to detail using CNC machinery.
-Counterweight located inside vertical column balances the load and allows single-handed operation.
-Low center of gravity base with foot-operated brake plungers, quickly secures base and dampens vibrations.
-High quality bearing casters provide easy movement around the studio.
Essential tools are included to complete assembly.
A unique STUDIO TITAN feature not found on other Studio Stands is the vertical and horizontal column graduated tape scales. The measuring scales provide a point of reference which allows the photographer to log and then quickly re-create a previous set-up.
• Total Height : 177cm / 69.68 in / 5 feet 9.6 in
• Working Height Maximum : 160cm / 62 in (measured from Camera Plate to floor)
• Working Height Minimum : 50cm / 19.7 in (measured from Camera Plate to floor)
• Working Width Horizontal - Left : 35cm / 13.77 in (center of Column to center of Camera plate)
• Working Width Horizontal - Right : 35cm / 13.77 in (center of Column to center of Camera plate)
• Overall Width of Horizontal Arm/Bar - 70cm / 27.5 in (center of Camera plate to center of Camera plate)
• Width : 70cm / 27.5 in
• Weight : 20kg / 44lbs
• Suggested Wheels : 01-360-20-024
• Base Diameter : 85cm / 33.4 in
• Recommended General load capacity : 5kg (10.2lbs)
• Camera Plate Hardware: 3/8th inch - 16 thread
• Includes two Camera Head Mount Plates and Basket as shown
-Small accessory shelf STA-01-397A for notebook computer
-Wheel Casters updated mid-2019
Studio Titan reserves the right to make product changes and improvements as required. As a result, the product supplied may not be exactly as pictured or specified.
This product is intended for use by professional and commercial photographers in a studio environment with a high ceiling. The wheels are designed to be used indoors on a floor that is smooth, hard, flat, and unobstructed. It is designed to be used at all times with a load (Camera or laptop shelf or both). This product is not recommended for use by hobbyists or in a household environment with a low ceiling or carpeted floors. Carpeting or pitted surfaces are not recommended because of the increased rolling resistance which can cause the stand to tip over. If the surface is not ideal, the stand must be moved with caution, very slowly, using both hands one at the top and the other at the bottom to steady the stand in order to prevent the stand from tipping over. If the surface is not ideal, lower the load to the waist level before moving the stand. We also recommend the use of a sandbag or weight attached at the base when conditions are not ideal to prevent tipping over. Ultimately it’s the users' responsibility to understand how the stand operates and to use the stand within its specification limits, as intended, to ensure their own safety and the safety of their equipment. It is also recommended to use a short tether cable to secure the camera to the stand in the event that the head, head plate, or camera adapter plate comes loose or fails. Some assembly is required, we recommend using an assistant during the initial product assembly.
Assembly Instructions are inside the package. If the assembly instructions are missing or you do not fully understand the instructions stop the assembly and consider the following resources. Visit the “SETUP” area of the website for documentation. Email questions to STA or contact STA by phone for further assistance.
The Vertical and Horizontal columns are made of aluminum. The counterweight is S20C steel.
The nuts and bolts are made of steel. The casters are polyurethane. This product does not contain lead.
Note: Due to this products large size and specific packaging and handling requirements it is sold as "non returnable".
STA 01-380 set-up Manual is being drafted