Professional Studio Camera Stand STA-01-360
The STA 01-360 [updated MK2 version] is designed for Professional Photography. The STA 01-360 provides exceptional value. The STA 01-360 is our best selling studio camera stand and is a perfect fit for mid-sized studios. This stand is categorized as 2-axis, it provides both vertical and horizontal movement of the camera. Vertical [up/down] travel is provided by the vertical carriage. Horizontal arm / bar [left/right] extension is provided by the horizontal carriage. The STA 01-360 can also pass through a standard doorway which makes it easy to move between classrooms and labs. The two supplied Camera Head Mount Plates are user adjustable and provide the following shooting positions: 0 degrees, pointing up as supplied, 90 degrees, 180 pointing down for tabletop photography, and 270 degrees.
-User positioned vertical carriage with precision smooth motion ball bearings and secure axis lock with one user brake knob
-User positioned Horizontal arm / bar carriage with precision smooth motion ball bearings and secure axis lock with two user brake knobs
-Precision-manufactured with attention to detail using CNC machinery.
-Counterweight located inside vertical column balances the load and allows single-handed operation.
-Low center of gravity base with foot-operated brake plungers, quickly secures base and dampens vibrations.
-High quality bearing casters provide easy movement around the studio.
Essential tools are included to complete assembly.
A unique STUDIO TITAN feature not always found on other Studio Stands is the vertical and horizontal column graduated tape scales. The measuring scales provide a point of reference which allows the photographer to log and then quickly re-create a previous set-up.
• Total Height : 192cm / 75.59 in
• Working Height Maximum : 180cm / 70.86 in (measured from Camera Plate to floor)
• Working Height Minimum : 50cm / 19.7 in (measured from Camera Plate to floor)
• Working Width Horizontal - Fully Extended to Left : 55cm / 21.6 in (center of Column to center of Camera plate)
• Working Width Horizontal - Fully Extended to Right : 55cm / 21.6 in (center of Column to center of Camera plate)
• Overall Working Width Horizontal - Fully Extended from Left to Fully Extended Right : 110cm / 43.2 in (center of Camera plate to center of Camera plate)
• Width : 85cm / 33.46 in
• Weight : 30kg / 66lbs
• Suggested Wheels : 01-360-20-024
• Base Diameter : 90cm / 35.4 in
• Recommended General load capacity : 7kg (15.4lbs)
• Camera Plate Hardware: 3/8th inch - 16 thread
• Includes two Camera Head Mount Plates and Basket as shown
-Large accessory shelf STA-01-395 for notebook computer
-Small accessory shelf STA-01-397A for notebook computer
-MK2 version introduced Mar-2021 with the following enhancements:
-50% increase in material wall thickness of the vertical column from 3mm to 4.5mm for increased strength and reduced flex.
-Added 2 additional securing bolts for a total of 4 bolts on the horizontal bar/arm carriage plate for increased strength.
-Stop pin added to the top of the vertical column preventing the counterweight from over-traveling upwards.
-Increased precision of bearing assemblies for horizontal and vertical carriages, provides smoother moving bearings and tighter tolerance on vertical and horizontal columns.
-Updated to higher quality, Grey Wheel Casters mid-2019
Studio Titan reserves the right to make product changes and improvements as required. As a result, the product supplied may not be exactly as pictured or specified.
This product is intended for use by professional and commercial photographers in a studio environment with a high ceiling. The wheels are designed to be used indoors on a floor that is smooth, hard, flat, and unobstructed. It is designed to be used at all times with a load (Camera or laptop shelf or both). This product is not recommended for use by hobbyists or in a household environment with a low ceiling or carpeted floors. Carpeting or pitted surfaces are not recommended because of the increased rolling resistance which can cause the stand to tip over. If the surface is not ideal, the stand must be moved with caution, very slowly, using both hands one at the top and the other at the bottom to steady the stand in order to prevent the stand from tipping over. If the surface is not ideal, lower the load to waist level before moving the stand. We also recommend the use of a sandbag or weight attached at the base when conditions are not ideal to prevent tipping over. Ultimately it’s the users' responsibility to understand how the stand operates and to use the stand within its specification limits, as intended, to ensure their own safety and the safety of their equipment. It is also recommended to use a short tether cable to secure the camera to the stand in the event that the head, head plate or camera adapter plate comes loose or fails. Some assembly is required, we recommend using an assistant during the initial product assembly.
Assembly Instructions are inside the package. If the assembly instructions are missing or you do not fully understand the instructions stop the assembly and consider the following resources. Visit the “SETUP” area of the website for documentation. Email questions to STA or contact STA by phone for further assistance.
The Vertical and Horizontal columns are made of aluminum. The counterweight is S20C steel.
The nuts and bolts are made of steel. The casters are polyurethane. This product does not contain lead.
Note: Due to this product's large size and specific packaging and handling requirements it is sold as "non-returnable".