L-Plate Arm STA-01-398

L-Plate Arm STA-01-398

Regular price $499

The STA-01-398 L-Plate Arm is a single arm with adjustable single head mount plate. It is designed to be quickly clamped onto either side of the camera stands horizontal arm.  It provides a third arm with head mount plate for either a camera, video camera or accessory.  STA-01-398 L-Plate Arm can be mounted onto the camera stands horizontal arm in the following positions: 0 degrees pointing up, 90 degrees pointing forward, 180 degrees pointing down and 270 degrees pointing back.  The circular tube can be mounted on either side of the clamp plate pointing toward the center column or away from the center column.  

The Camera Head Mount Plate is adjustable, anywhere from 0-360 degrees around the circular arm.

The STA-01-398 L-Plate Arm can be configured for use or to shoot beyond the length of the camera stands horizontal arm, extending the arm.  It can be configured to shoot lower than the minimum height of the horizontal arm, for low perspective shooting or ground work.  It can be configured to shoot above the maximum height of the horizontal arm for larger or taller subjects.  It can be configured to shoot in front of the horizontal arm, for over table product photography. 

Compatible Camera Stands:

-STA-01-360MK2 [*see note regarding reduced loading] 

-STA-01-360 [*see note regarding reduced loading] 

-STA-C01-360 [*see note regarding reduced loading] 

-STA-01-350 [*see note regarding reduced loading] 

-STA-01-350MK2 [*see note regarding reduced loading] 

-STA-C01-350-TRI [*see note regarding reduced loading] 

-STA-01-350RMK2 [*see note regarding reduced loading] 

-STA-01-380  [*see note regarding reduced loading] 

*CAUTION:  

When using the STA-01-398 L-Plate Arm the load capacity [camera, etc.] must be reduced.

The nominal load capacity must be reduced by using the following formula:

(STA supplied published stand load capacity / (300mm + Length of originally supplied STA Horizontal Arm/Bar in mm )/ (Length of originally supplied STA Horizontal Arm/Bar in mm)) = new full extension load capacity 

 ( STA-C01-360= 10kg ) / (300mm+700mm / 700mm ) = 7 Kg / 15.4 lbs

• Total Length of 01-398 L-plate circular Arm: approx. 300mm / 12 in 

Total Height of 01-398 L-plate Arm: approx. 300mm / 12 in 

Weight of 01-398 L-plate Arm: 2 Kg / 4.4 lbs 

 

Hex key tool is included to complete assembly.

 Studio Titan reserves the right to make product changes and improvements as required. As a result the product supplied may not be exactly as pictured or specified.  

*Before installation and use of the STA-01-398 L-Plate arm please read the manual.  When using the STA-01-398 L-Plate arm, consideration for load reduction and using additional weights / sand bags on the legs of the base are required to prevent instability or a tip over.  

 

Assembly Instructions are inside the package. If the assembly instructions are missing or you do not fully understand the instructions stop the assembly and consider the following resources. Visit the “SETUP” area of the website for documentation. Email questions to STA or contact STA by phone for further assistance.

Material composition:

The Arm is made of aluminum. 



L-Plate Arm STA-01-398