Super Commercial Studio Camera Stand STA-C01-500-TRI
The STA C01-500-TRI Super Commercial Stand is designed to accommodate very high loads for industrial digital image correlation and optical measurement systems. The STA C01-500-TRI was designed to move between labs, production and test cells, through standard doorways. The [TRI] model includes user adjustable upper and lower travel stops with deceleration bumpers. This unique feature was designed to provide a specific user adjustable range of motion. The [TRI] model includes user adjustable vertical carriage friction speed control function. This allows the user to adjust friction pads to dampen or slow the rate of movement . The STA C01-500-TRI Super Commercial Stand uses an oversized square vertical column design. The oversized vertical carriage is designed to allow the horizontal arm to freely rotate, 360 degrees, around the vertical column while the base remains stationary. The stand weighs 173kg/380lbs the base is heavily weighted for added stability.
The Camera Head Mount Plates are user adjustable and provides a range of: 0 - 360 degrees. The stand is supplied with the Head Mount Plates oriented in the 0 degree position.
The STA C01-500-TRI Super Commercial Stand is supplied upright and fully assembled. It is packaged in a wooden shipping container and is delivered by truck to your location.
The STA C01-500-TRI Super Commercial Stand is available either from stock with 1-2 week delivery time or by pre-order with a 12-16 working week lead time. It is packaged in a wooden shipping container and is delivered by truck to your location. Unless special delivery and off loading requirements are arranged in advance. The container will be delivered to your shipping dock or dropped off as close to the entrance of your facility as possible. Please contact us by email for pricing based on special delivery and off loading requirements.
Precision Manufactured with attention to detail using CNC machinery.
Smooth motion bearings on Z and Y columns with secure axis lock. Smooth circular rotation of horizontal axis with secure axis lock.
Counterweight in center column allows single handed operation.
Low center of gravity base.
The foot operated brake plungers provide quick operation and prevent movement on flat surfaces.
• Total Height : 200cm / 78.7 in
• Working Height Maximum : 140cm / in (approx. measured from Camera Plate to floor)
• Working Height Minimum : 80cm / in (approx. measured from Camera Plate to floor)
• Working Width Horizontal : 50.8 cm / 20.0 in (approx. center of Column to center of Camera plate)
• Horizontal Arm Width : 85cm / 33.46 in
• Weight : 173kg / 380lbs
• Wheel Diam. : 12.7cm/ 5.0 in
• Base Diameter : 110cm / 43.30 in
• Recommended Max load capacity : 36kg (80lbs)
• Recommended USER load weight: 31kg (68lbs)
• Counterweight Mass : 40kg (88lbs)
• TRI feature 1 : Upper & Lower adjustable safety clamps
• TRI feature 2 : Adjustable vertical carriage friction speed control function
• Camera Plate Hardware: 3/8th inch - 16 thread
• Includes two Camera Head Mount Plates and Basket as shown
Terms of Sale: This product is final sale, no cancelation, no returns
Lead Time: Stock to 12-16 working weeks ARP + holidays
-Accessory shelf for notebook is available as option
Studio Titan reserves the right to make product changes and improvements as required. As a result the product supplied may not be exactly as pictured or specified.
This product is intended for use by professional and commercial Scientists and photographers in a studio or Laboratory environment. The wheels are designed to be used indoors on a floor that is smooth, hard, flat and unobstructed. It is designed to be used at all times with a load (Camera or laptop shelf or both). This product is not recommended for use by hobbyists. If the surface is not ideal, the stand must be moved with caution, very slowly, using both hands one at the top and the other at the bottom to steady the stand in order to prevent the stand from tipping over. If the surface is not ideal, lower the load to waist level before moving the stand. We also recommend the use of a sandbag or weight attached at the base when conditions are not ideal to prevent tipping over. Ultimately it’s the users responsibility to understand how the stand operates and to use the stand within its specification limits, as intended, to insure their own safety and the safety of their equipment. It is also recommended to use a short tether cable to secure the camera to the stand in the event that the head, head plate or camera adapter plate comes loose or fails. No assembly is required.
Operational Instructions are inside the package. If the instructions are missing or you do not fully understand the instructions stop and consider the following resources. Visit the “SETUP” area of the website for documentation. Email questions to STA or contact STA by phone for further assistance.
The Vertical and Horizontal columns are made of aluminum. The counterweight is S20C steel.
The nuts and bolts are made of steel. The casters are polyurethane. This product does not contain lead.
Note: Due to this products large size and specific packaging and handling requirements it is sold as "non returnable".