STA-06-090D SIDE KICK - DUAL PISTOL GRIP - Studio Camera Stand
DUAL PISTOL GRIP VERSION
STA 06-090D is designed for the Professional Photographer and engineered for daily use. The STA 06-090D Side Kick is a Premium Stand, used for both location shooting and smaller studios. The Side Kick weighs only 8Kg/17.6lbs making it our most versatile stand. The Side kick column material is made of STEEL not Aluminum. The side kick provides a payload capacity of 20kgs/44lbs, which is more than double when compared to other portable stands. Stands with Aluminum columns dent, ding and scratch more easily when compared to STEEL. STEEL is stronger, 2.5 times more dense than Aluminum, less likely to warp, deform or bend under weight and force. The heavy duty Pistol Grip Platform with attachment stud, easily guides a Camera or Strobe up or down the column. The heavy duty Pistol Grip includes a two locking knobs. The first locking knob prevents unwanted vertical movement when set. The second locking knob secures the attachment stud. When adjusted for Parking Mode the Side Kick remains stationary on a flat surface without locking the casters. Use Parking Mode when small movements are needed to find the best shooting position. A perfect stand for fashion, portrait and event photography. TWO heavy duty Pistol Grip platforms with attachment studs are supplied with this version. Pistol Grips can be used for camera + strobe or dual strobe or laptop holder configuration.
Includes tools required to complete assembly.
Precision Manufactured with attention to detail.
Low center of gravity base.
Premium Dual Stage casters provide easy movement around the studio. The dual stage foot brake stops both the wheel from rotating and the caster housing from swivelling, preventing unwanted movement.
Maximum evenly distributed load on level ground: 20kg/44lbs
• Total Height : 232cm / 91.3 in
• Working Height Maximum : 232cm / 91.3 in (measured from top of PISTOL GRIP to floor)
• Working Height Minimum : 34cm / 13.3 in (measured from top of PISTOL GRIP to floor)
• Shaft Diameter : 35mm / 1.378 in (material: Steel)
• Weight : 8kg / 17.6lbs
• Suggested Wheels : 01-090-20-023
• Base Diameter :100cm / 39.3 in
• Recommended General load capacity : 20kg (44lbs)
• Camera Attachment Stud : 3/8th inch - 16 thread
-Second heavy duty Pistol Grip Platform with attachment stud
*Custom finishes and designs are available, subject to NRE fee and minimum order quantities
Studio Titan America reserves the right to make product changes and improvements as required. As a result the product supplied may not be exactly as pictured or specified.
This product is intended for use by professional and commercial photographers in a studio environment or location with a high ceiling. The wheels are designed to be used indoors on a floor that is smooth, hard, flat and unobstructed. This product is not recommended for use by hobbyists or in a household environment with a low ceiling or carpeted floors. Low pile carpeting or pitted surfaces are not recommended because of the increased rolling resistance which can cause the stand to tip over. If the surface is not ideal, the stand must be moved with caution, very slowly, using both hands one at the top and the other at the bottom to steady the stand in order to prevent the stand from tipping over. We also recommend using a sandbag or weight attached to the base when conditions are not ideal to prevent tipping over. Ultimately it’s the users responsibility to understand how the stand operates and to use the stand within its specification limits, as intended, to insure their own safety and the safety of their equipment. It is also recommended to use a short tether cable to secure the camera to the stand in the event that the head or head plate or attachment stud comes loose or fails. Some assembly is required, we recommend using an assistant during the initial product assembly.
Assembly Instructions are inside the package. If the assembly instructions are missing or you do not fully understand the instructions stop the assembly and consider the following resources. Visit the “SETUP” area of the website for documentation. Email questions to STA or contact STA by phone for further assistance.
-The Vertical column is made of steel. The Pistol Grip is made of aluminum alloy. The nuts and bolts are made of stainless steel. The casters are made of polyurethane. This product does not contain lead.