{"title":"RELATED PRODUCTS: 01-350MK2-TS","description":"\u003cp\u003eRELATED PRODUCTS: 01-350MK2-TS\u003c\/p\u003e","products":[{"product_id":"lowering-plate-sta-01-398","title":"Lowering Plate STA-01-398","description":"\u003cp\u003eThe STA-01-398 L Plate is a clamp-on extension arm with an adjustable camera head mount plate. This option provides a third camera head mount plate.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePositioned above the horizontal arm to raise the height of the stand.\u003c\/li\u003e\n\u003cli\u003ePositioned below the horizontal arm to shoot at ground level.\u003c\/li\u003e\n\u003cli\u003ePositioned in front of the horizontal arm to shoot over an object.\u003c\/li\u003e\n\u003cli\u003ePositioned behind the horizontal arm to shoot over an object.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe clamp-on extension arm can also be mounted with the arm facing towards the vertical column or away from the vertical column. When the arm is mounted away from the vertical column it extends the length of the horizontal arm, which is useful for overtable photography. When used with the STA 01-360\/MK2 \u0026amp; STA 01-350\/MK2 camera stands to provide extended shoot range below and above the horizontal arm\/bar.\u003c\/p\u003e\n\u003cp\u003eWhen mounted for low position shooting it extends the lower range by approximately 28cm \/11 in. With the STA-01-398 L Plate installed on the STA 01-360 MK2 or the STA 01-350 MK2 the minimum working height is lowered to 22cm \/ 8.6 inches from the floor. When mounted for high position shooting it raises the upper range by approximately 28cm \/11 in.\u003c\/p\u003e\n\u003cp\u003eWith the STA-01-398 L Plate installed on the STA 01-360 MK2 the maximum working height is raised to 208cm \/ 79.5 inches from the floor. With the STA-01-398 L Plate installed on the STA 01-350 MK2 the maximum working height is raised to 248cm \/ 97.6 inches from the floor.\u003c\/p\u003e\n\u003cp\u003eThe STA-01-398 L Plate can be mounted onto the camera stands horizontal arm in the following positions: 0 degrees pointing up, 60 degrees pointing forward, 120 degrees pointing forward and downward, 180 degrees pointing down, 240 degrees pointing backward and downward, 300 degrees pointing backward and upward. The circular tube can be mounted on either side of the clamp plate pointing toward the center column or away from the center column.\u003c\/p\u003e\n\u003cp\u003eThe Camera Head Mount Plate can be re-positioned using the hand lever. It can be re-positioned anywhere from 0-360 degrees around the circular arm.\u003c\/p\u003e\n\u003cp\u003eCompatible Camera Stands:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSTA-01-360MK2 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-01-360 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-C01-360 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-01-350 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-01-350MK2 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-C01-350-TRI [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-01-350RMK2 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-01-380 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e*CAUTION: \u003c\/strong\u003eWhen using the STA-01-398 L Plate the load capacity [camera, etc.] must be reduced.\u003c\/p\u003e\n\u003cp\u003eThe nominal load capacity must be reduced by using the following formula:\u003c\/p\u003e\n\u003cp\u003e(STA supplied published stand load capacity \/ (300mm + Length of originally supplied STA Horizontal Arm\/Bar in mm )\/ (Length of originally supplied STA Horizontal Arm\/Bar in mm)) = new full extension load capacity\u003c\/p\u003e\n\u003cp\u003e( STA-C01-360= 10kg ) \/ (300mm+700mm \/ 700mm ) = 7 Kg \/ 15.4 lbs\u003c\/p\u003e\n\u003cp\u003eSome assembly is required, please review the set-up \u0026amp; use manual. Hex key tools are included to complete assembly.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1568\/5511\/files\/STA_01-398_Lowering_Plate_Set-up_manual_March_22_2022.pdf?v=1648070128\" target=\"_blank\"\u003e\u003cspan\u003eSTA 01-398 Lowering Plate Set-up \u0026amp; Use Manual\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e* Before installation and use of the STA-01-398 L Plate arm please read the manual. When using the STA-01-398 L Plate arm, consideration for load reduction and using additional weights \/ sand bags on the legs of the base are required to prevent instability or a tip over.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Update\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStudio Titan reserves the right to make product changes and improvements as required. As a result the product supplied may not be exactly as pictured or specified.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProp. 65 Warning Label Explanation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor clients who are in the State of California, we have voluntarily added Prop. 65 warning labels to prevent unintentional misrepresentation. It is our intention to supply products that are not toxic and are compliant with Prop. 65 safe level guidelines. We require that our vendors also comply with Prop. 65 safe level materials guidelines, but we are not fully in control of the raw material supply chain.\u003c\/p\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" src=\"https:\/\/fonts.gstatic.com\/s\/e\/notoemoji\/16.0\/26a0_fe0f\/72.png\" draggable=\"false\" aria-label=\"⚠️\" alt=\"⚠️\" class=\"an1\" data-emoji=\"⚠️\" width=\"24\" height=\"24\"\u003e WARNING TO OUR CALIFORNIAN CONSUMERS:\u003c\/p\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause cancer or birth defects and reproductive harm. For more information go to:\u003ca class=\"text-link\" data-saferedirecturl=\"https:\/\/www.google.com\/url?q=https:\/\/www.p65warnings.ca.gov\/\u0026amp;source=gmail\u0026amp;ust=1740606858548000\u0026amp;usg=AOvVaw3gjpaEXnS0Ubqev7NHS8p8\" href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ehttps:\/\/www.p65warnings.ca.gov\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Studio Titan America","offers":[{"title":"Default Title","offer_id":41530843824281,"sku":"","price":554.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1568\/5511\/files\/Studio-Titan-01-398-1.jpg?v=1759598913"},{"product_id":"folding-arm-sta-06-105","title":"Folding Arm STA-06-105 (For STA 01-350 Series Systems)","description":"\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e The Stand is for illustrative purposes only. The STA 06-105 folding arm does not include the stand shown in the images.\u003c\/p\u003e\n\u003cp\u003eThe STA 06-105 folding arm was developed in conjunction with the MET in NYC, USA. The primary design objective was to facilitate 360 photography of large permanent statues and installations using two 180 degree set-ups around the subject. It is also used for 360 spin photography using one camera in conjunction with a rotary table. Other applications include forensic studies and Industrial Dual Image Correlation applications.\u003c\/p\u003e\n\u003cp\u003eThe STA 06-105 folding arm has unique features that make it desirable. It adds a third axis that allows the user to increase the stand's usable vertical and horizontal range of motion in addition to a work envelope in front of the stand. The camera is easily positioned anywhere within the work envelope while the stand remains stationary and out of the way.\u003c\/p\u003e\n\u003cp\u003eThe design of STA 06-105 folding arm keeps the head mount plate parallel with the floor as the angle of arm changes, which maintains camera perspective as the arm is moved around the subject. The integrated internal pneumatic counterbalance, is user adjustable. When the camera is counterbalanced it can be moved with little effort, easily and precisely into position. When the user releases the camera it holds its vertical position.\u003c\/p\u003e\n\u003cp\u003eCompatible Stands (Note*):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSTA 01-350MK2\u003c\/li\u003e\n\u003cli\u003eSTA 01-350RMK2\u003c\/li\u003e\n\u003cli\u003eSTA 01-350MK2-TRI\u003c\/li\u003e\n\u003cli\u003eSTA 01-350R-MK2-TRI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote*: The optional Leg Weight Set STA-01-350LW-15 is also required when the STA 06-105 folding arm is in use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrecision-manufactured with attention to detail using CNC machinery.\u003c\/li\u003e\n\u003cli\u003ePneumatic counterbalance located inside the arm balances the load and allows single-handed operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSome assembly is required, please review the set-up \u0026amp; use manual.\u003cbr\u003eIncludes essential tools required to complete assembly.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1568\/5511\/files\/STA_06-105_Folding_Arm_Aug_24_2022.pdf?v=1661385284\" target=\"_blank\"\u003eSTA 06-105 Set-up \u0026amp; Use Manual\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Updates\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStudio Titan reserves the right to make product changes and improvements as required. As a result, the product supplied may not be exactly as pictured or specified.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProp. 65 Warning Label Explanation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor clients who are in the State of California, we have voluntarily added Prop. 65 warning labels to prevent unintentional misrepresentation. It is our intention to supply products that are not toxic and are compliant with Prop. 65 safe level guidelines. We require that our vendors also comply with Prop. 65 safe level materials guidelines, but we are not fully in control of the raw material supply chain.\u003c\/p\u003e\n\u003cp\u003e\u003cimg loading=\"lazy\" src=\"https:\/\/fonts.gstatic.com\/s\/e\/notoemoji\/16.0\/26a0_fe0f\/72.png\" draggable=\"false\" aria-label=\"⚠️\" alt=\"⚠️\" class=\"an1\" data-emoji=\"⚠️\" width=\"24\" height=\"24\"\u003e WARNING TO OUR CALIFORNIAN CONSUMERS:\u003c\/p\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause cancer or birth defects and reproductive harm. For more information go to:\u003ca class=\"text-link\" data-saferedirecturl=\"https:\/\/www.google.com\/url?q=https:\/\/www.p65warnings.ca.gov\/\u0026amp;source=gmail\u0026amp;ust=1740606858548000\u0026amp;usg=AOvVaw3gjpaEXnS0Ubqev7NHS8p8\" href=\"https:\/\/www.p65warnings.ca.gov\/\" target=\"_blank\"\u003ehttps:\/\/www.p65warnings.ca.gov\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Studio Titan America","offers":[{"title":"Default Title","offer_id":42814719557785,"sku":"","price":1665.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1568\/5511\/files\/Studio-Titan-06-105-4.jpg?v=1767043853"},{"product_id":"sta-01-398das","title":"Dual Plate Single Camera Head Arm STA-01-398DAS","description":"\u003cp\u003eThe STA-01-398DAS is a clamp-on extension arm with two clamp plates and one adjustable camera head mount. This option provides a third camera head mount plate. Two two clamp plates increases rigidity of the extension arm.\u003c\/p\u003e\n\u003cp\u003eIt is designed to be quickly clamped onto the horizontal arm, in multiple positions:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePositioned above the horizontal arm to raise the height of the stand.\u003c\/li\u003e\n\u003cli\u003ePositioned below the horizontal arm to shoot at ground level.\u003c\/li\u003e\n\u003cli\u003ePositioned in front of the horizontal arm to shoot over an object.\u003c\/li\u003e\n\u003cli\u003ePositioned behind the horizontal arm to shoot over an object.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe clamp-on extension arm can also be mounted with the arm facing towards the vertical column or away from the vertical column. When the arm is mounted away from the vertical column it extends the length of the horizontal arm, which is useful for over-table photography.\u003c\/p\u003e\n\u003cp\u003eWhen used with the STA 01-360\/MK2 \u0026amp; STA 01-350\/MK2 camera stands it provides extended shooting range below and above the horizontal arm\/bar. When mounted for low position shooting it lowers the minimum range by approximately 28cm \/11 in. With the STA-01-398DAS arm installed on the STA 01-360 MK2 or the STA 01-350 MK2 the minimum working height is lowered to 22cm \/ 8.6 inches from the floor.\u003c\/p\u003e\n\u003cp\u003eWhen mounted for high position shooting it raises the upper range by approximately 28cm \/11 in. With the STA-01-398DAS arm installed on the STA 01-360 MK2 the maximum working height is raised to 208cm \/ 79.5 inches from the floor. With the STA-01-398DAS arm installed on the STA 01-350 MK2 the maximum working height is raised to 248cm \/ 97.6 inches from the floor. The STA-01-398DAS arm can be clamped onto either side of the camera stands horizontal arm.\u003c\/p\u003e\n\u003cp\u003eThe STA-01-398DAS arm can be mounted onto the camera stands horizontal arm in the following positions: 0 degrees pointing up, 60 degrees pointing forward, 120 degrees pointing forward and downward, 180 degrees pointing down, 240 degrees pointing backward and downward, 300 degrees pointing backward and upward. The circular tube can be mounted on either side of the clamp plate pointing toward the center column or away from the center column.\u003c\/p\u003e\n\u003cp\u003eThe Camera Head Mount Plate can be re-positioned using the hand lever. It can be re-positioned anywhere from 0-360 degrees around the circular arm.\u003c\/p\u003e\n\u003cp\u003eCompatible Camera Stands:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSTA-01-360MK2 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-01-360 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-C01-360 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-01-350 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-01-350MK2 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-C01-350-TRI [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-01-350RMK2 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e*CAUTION: \u003c\/strong\u003eWhen using the STA-01-398DAS the load capacity [camera, etc.] must be reduced.\u003c\/p\u003e\n\u003cp\u003eThe nominal load capacity must be reduced by using the following formula:\u003c\/p\u003e\n\u003cp\u003e(STA supplied published stand load capacity \/ (300mm + Length of originally supplied STA Horizontal Arm\/Bar in mm )\/ (Length of originally supplied STA Horizontal Arm\/Bar in mm)) = new full extension load capacity\u003c\/p\u003e\n\u003cp\u003e( STA-C01-360= 10kg ) \/ (300mm+700mm \/ 700mm ) = 7 Kg \/ 15.4 lbs\u003c\/p\u003e\n\u003cp\u003eSome assembly is required, please review the set-up \u0026amp; use manual. Hex key tools are included to complete assembly.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1568\/5511\/files\/STA_01-398_Lowering_Plate_Set-up_manual_March_22_2022.pdf?v=1648070128\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan\u003eSTA 01-398 Lowering Plate Set-up \u0026amp; Use Manual\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e* Before installation and use of the STA-01-398DAS arm please read the manual. When using the STA-01-398DAS arm, consideration for load reduction and using additional weights \/ sand bags on the legs of the base are required to prevent instability or a tip over.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Update\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStudio Titan reserves the right to make product changes and improvements as required. As a result the product supplied may not be exactly as pictured or specified.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProp. 65 Warning Label Explanation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor clients who are in the State of California, we have voluntarily added Prop. 65 warning labels to prevent unintentional misrepresentation. It is our intention to supply products that are not toxic and are compliant with Prop. 65 safe level guidelines. We require that our vendors also comply with Prop. 65 safe level materials guidelines, but we are not fully in control of the raw material supply chain.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"24\" width=\"24\" data-emoji=\"⚠️\" class=\"an1\" alt=\"⚠️\" aria-label=\"⚠️\" draggable=\"false\" src=\"https:\/\/fonts.gstatic.com\/s\/e\/notoemoji\/16.0\/26a0_fe0f\/72.png\" loading=\"lazy\"\u003e WARNING TO OUR CALIFORNIAN CONSUMERS:\u003c\/p\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause cancer or birth defects and reproductive harm. For more information go to:\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" data-saferedirecturl=\"https:\/\/www.google.com\/url?q=https:\/\/www.p65warnings.ca.gov\/\u0026amp;source=gmail\u0026amp;ust=1740606858548000\u0026amp;usg=AOvVaw3gjpaEXnS0Ubqev7NHS8p8\" class=\"text-link\" target=\"_blank\"\u003ehttps:\/\/www.p65warnings.ca.gov\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Studio Titan America","offers":[{"title":"Default Title","offer_id":43328364707993,"sku":null,"price":721.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1568\/5511\/files\/Studio-Titan-01-398DAS-1.jpg?v=1759593753"},{"product_id":"sta-01-398dat","title":"Dual Plate Two Camera Head Arm STA-01-398DAT","description":"\u003cp\u003eThe STA-01-398DAT is a clamp-on extension arm with two clamp plates and two adjustable camera head mounts. This option provides a third and a fourth camera head mount plate. Two clamp plates increases rigidity of the extension arms.\u003c\/p\u003e\n\u003cp\u003eIt is designed to be quickly clamped onto the horizontal arm, in multiple positions:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePositioned above the horizontal arm to raise the height of the stand.\u003c\/li\u003e\n\u003cli\u003ePositioned below the horizontal arm to shoot at ground level.\u003c\/li\u003e\n\u003cli\u003ePositioned in front of the horizontal arm to shoot over a table or object.\u003c\/li\u003e\n\u003cli\u003ePositioned behind the horizontal arm to shoot over a table or object.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe clamp-on extension arm can also be mounted with the arm facing towards the vertical column or away from the vertical column. When the arm is mounted away from the vertical column it extends the length of the horizontal arm, which is useful for overtable photography.\u003c\/p\u003e\n\u003cp\u003eWhen used with the STA 01-360\/MK2 \u0026amp; STA 01-350\/MK2 camera stands it provides extended shooting range below and above the horizontal arm\/bar. When mounted for low position shooting it lowers the minimum range by approximately 28cm \/11 in. With the STA-01-398DAT arm installed on the STA 01-360 MK2 or the STA 01-350 MK2 the minimum working height is lowered to 22cm \/ 8.6 inches from the floor.\u003c\/p\u003e\n\u003cp\u003eWhen mounted for high position shooting it raises the upper range by approximately 28cm \/11 in. With the STA-01-398DAT arm installed on the STA 01-360 MK2 the maximum working height is raised to 208cm \/ 79.5 inches from the floor. With the STA-01-398DAT arm installed on the STA 01-350 MK2 the maximum working height is raised to 248cm \/ 97.6 inches from the floor. The STA-01-398DAT arm can be clamped onto either side of the camera stands horizontal arm.\u003c\/p\u003e\n\u003cp\u003eThe STA-01-398DAT clamp-on extension arm can be mounted onto the camera stands horizontal arm in the following positions: 0 degrees pointing up, 60 degrees pointing forward, 120 degrees pointing forward and downward, 180 degrees pointing down, 240 degrees pointing backward and downward, 300 degrees pointing backward and upward. The circular tube can be mounted on either side of the clamp plate pointing toward the center column or away from the center column.\u003c\/p\u003e\n\u003cp\u003eThe Camera Head Mount Plate can be re-positioned using the hand lever. It can be re-positioned anywhere from 0-360 degrees around the circular arm.\u003c\/p\u003e\n\u003cp\u003eCompatible Camera Stands:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSTA-01-360MK2 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-01-360 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-C01-360 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-01-350 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-01-350MK2 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-C01-350-TRI [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-01-350RMK2 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e*CAUTION: \u003c\/strong\u003eWhen using the STA-01-398DAT the load capacity [camera, etc.] must be reduced.\u003c\/p\u003e\n\u003cp\u003eThe nominal load capacity must be reduced by using the following formula:\u003c\/p\u003e\n\u003cp\u003e(STA supplied published stand load capacity \/ (300mm + Length of originally supplied STA Horizontal Arm\/Bar in mm )\/ (Length of originally supplied STA Horizontal Arm\/Bar in mm)) = new full extension load capacity\u003c\/p\u003e\n\u003cp\u003e( STA-C01-360= 10kg ) \/ (300mm+700mm \/ 700mm ) = 7 Kg \/ 15.4 lbs\u003c\/p\u003e\n\u003cp\u003eSome assembly is required, please review the set-up \u0026amp; use manual. Hex key tools are included to complete assembly.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1568\/5511\/files\/STA_01-398_Lowering_Plate_Set-up_manual_March_22_2022.pdf?v=1648070128\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan\u003eSTA 01-398 Lowering Plate Set-up \u0026amp; Use Manual\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e* Before installation and use of the STA-01-398DAT arm please read the manual. When using the STA-01-398DAT arm, consideration for load reduction and using additional weights \/ sand bags on the legs of the base are required to prevent instability or a tip over.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Update\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStudio Titan reserves the right to make product changes and improvements as required. As a result the product supplied may not be exactly as pictured or specified.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProp. 65 Warning Label Explanation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor clients who are in the State of California, we have voluntarily added Prop. 65 warning labels to prevent unintentional misrepresentation. It is our intention to supply products that are not toxic and are compliant with Prop. 65 safe level guidelines. We require that our vendors also comply with Prop. 65 safe level materials guidelines, but we are not fully in control of the raw material supply chain.\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"24\" width=\"24\" data-emoji=\"⚠️\" class=\"an1\" alt=\"⚠️\" aria-label=\"⚠️\" draggable=\"false\" src=\"https:\/\/fonts.gstatic.com\/s\/e\/notoemoji\/16.0\/26a0_fe0f\/72.png\" loading=\"lazy\"\u003e WARNING TO OUR CALIFORNIAN CONSUMERS:\u003c\/p\u003e\n\u003cp\u003eThis product can expose you to chemicals known to the State of California to cause cancer or birth defects and reproductive harm. For more information go to:\u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" data-saferedirecturl=\"https:\/\/www.google.com\/url?q=https:\/\/www.p65warnings.ca.gov\/\u0026amp;source=gmail\u0026amp;ust=1740606858548000\u0026amp;usg=AOvVaw3gjpaEXnS0Ubqev7NHS8p8\" class=\"text-link\" target=\"_blank\"\u003ehttps:\/\/www.p65warnings.ca.gov\/\u003c\/a\u003e\u003c\/p\u003e","brand":"Studio Titan America","offers":[{"title":"Default Title","offer_id":43328371196057,"sku":null,"price":765.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1568\/5511\/files\/Studio-Titan-01-398DAT-1.jpg?v=1759594700"}],"url":"https:\/\/studiotitanamerica.com\/collections\/related-products-01-350mk2-ts.oembed","provider":"Studio Titan America","version":"1.0","type":"link"}